某发动机调节器自动检测异常故障分析

针对某型发动机自动调节器自动检测异常的故障现象,对产生发动机自动调节器自动检测异常的原因进行了深入地研究分析,并提出了针对性的预防措施。     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

存在干扰下的无人机中继站波束成形算法

无人机(UAV)通信具有部署快、使用灵活、通信质量好等优点,在无线通信领域具有广阔的应用前景。采用UAV作为中继站构成的增强型卫星通信网络经常受到各种干扰的影响,导致其性能急剧下降。以信干噪比(SINR)最大化为准则,UAV中继站发射功率满足要求为约束条件的优化问题的基础上,提出了一种基于最大瑞利熵的波束成形(BF)算法,得出最优权矢量。为了降低BF算法的实现复杂度,进一步提出了一种基于迫零(ZF)的次优BF算法。计算机仿真验证了这2种BF算法的有效性。     

翼身融合布局飞机机体-发动机气动干扰效应

翼身融合（BWB）布局飞机是一种相对较新的飞行器概念，具有商业运输飞机的潜在用途。研究表明，翼身融合布局客机可获得比常规布局客机更好的性能。但是，由于各方面限制，BWB飞机不宜使用传统的机翼安装或机身安装的发动机布局，发动机背部安装成为首选布局。然而，背部安装发动机容易产生激波、分离、进气畸变等空气动力干扰问题，发动机与机身一体化的气动设计已成为BWB飞机发展的关键技术。针对BWB布局飞机的机体和发动机之间的气动干扰进行了数值研究，结果表明，背部安装发动机对BWB布局飞机的全机气动特性和发动机本身的推力性能都会产生较为明显的影响。     

某型飞机通信电台干扰油量系统故障分析

针对某型飞机通信电台干扰油量系统故障，分析了油量测量系统的原理和电磁干扰机理，研究了故障发生的原因，制定了抑制干扰的措施，解决了一直困扰修理的油量指示系统跳变问题，提高了飞机修理质量。     

高速风洞模型支撑方式研究

为了合理选择模型支撑形式,在高速风洞进行了直支杆与Z 支杆两种支撑形式的支架干扰研究试验。结果发现,支架对模型带来不可忽略的干扰量,两种支撑形式对升力、阻力与力矩的干扰量随迎角基本上呈线性变化;直支杆由于距离模型较近,对模型尾部带来较大的影响。而Z 支杆对模型尾部影响较小,在全机与无尾两种状态下的干扰量较为相近。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

冷原子干涉陀螺研究进展

近年来,基于激光冷却与俘获的冷原子干涉技术得到了飞速的发展,这为精密转动测量提供了新的研究方向。相比于传统陀螺,冷原子干涉陀螺具有更高的灵敏度,是新一代的惯性测量仪器。从冷原子干涉陀螺的测量原理出发,介绍了近几年国内外干涉型冷原子陀螺的实现技术路线和研究现状,对比了各技术路线的优缺点,提炼出了最佳的研制冷原子干涉陀螺的总体技术方案,为高精度和高动态测量的陀螺样机研制提供了技术基础。     

数字示波器在尖峰干扰脉冲强度测量中的应用

运用数字示波器瞬态捕获能力及面积测量功能，快速、准确、不遗漏地测量电子设备的尖峰干扰信号（脉冲信号），用公式将脉冲强度单位换算为脉冲频谱密度单位。     

Decision-making of Aircraft Optimum Configuration Utilizing Multidimensional Game Theory

As multi-discipline coupling and components interference often affect the aircraft configuration decision-making and analysis during conceptual design process, this article presents an approach of multidimensional game theory based on aircraft components to deal with this problem. The idea is that the configuration decision-making process is regarded as the game for different disciplines and technologies, and the aircraft components are players. The payoff function with highest total gain means that according to the game protocols and multidimensional theory, the optimal aircraft configuration within the strategy set will be chosen. The decision-making model is applied to conceptual design process of the high altitude long endurance (HALE) unmanned aerial vehicle (UAV) based on the assessment of technological risk. The obtained optimum configuration is quite consistent with the current HALE UAV development trends. Thus, taking into account the coupling and interference factors, the multidimensional gaming model based on aircraft components will be an effective analysis method in the decision-making process of aircraft optimum configuration.